Three roll plate bending machine manufacturer

One of the most important components when using a three roll plate bending machine is the blade. However, the blade will wear out the casting during use, and after some serious wear, it will have a significant impact on the operating efficiency of the equipment. The three roll plate bending machine manufacturer will teach you how to maintain the blade during use.
1.Keep clean: After each use, promptly clean the oil stains, metal shavings, and debris on the blade to ensure a clean surface. This not only prevents debris from affecting the performance of the blade, but also extends its service life.

2.Lubrication and maintenance: Regularly lubricate the blades according to the lubrication chart requirements. Choose the appropriate lubricant, such as lubricating oil or grease, and ensure that the oil quality is clean and free from accumulation. Lubrication can reduce friction between the blade and other components of the three roll bending machine, improving work efficiency.

3.Inspection and replacement: Regularly check the wear and tear of the blades, including the degree of wear, whether there are cracks or deformations, etc. Once severe wear or damage is found on the blade, it should be replaced with a new one in a timely manner to avoid affecting the processing quality and efficiency of the three roll plate bending machine.
4.Non operators are prohibited from operating: Non professionals are strictly prohibited from operating the three roll plate bending machine to avoid blade damage or safety accidents caused by improper operation. Only personnel who have received professional training and are familiar with equipment operation can carry out the operation.
5.Handling after shutdown: After shutdown, the blades should be thoroughly cleaned and lubricated, and then stored properly to prevent rusting or other damage to the blades.
6.Pay attention to safety: When performing blade maintenance, be sure to follow safety operating procedures and wear protective equipment such as gloves, goggles, etc. At the same time, it is necessary to ensure that the equipment is in a power-off state to avoid electric shock accidents.
In summary, the maintenance of the blades of the three roll plate bending machine requires careful and patient attention. Only by following the correct maintenance methods and steps can the long-term stable operation and processing quality of the blades be ensured.